Bearbeiten von „KIF510:Two Rooms and A Boom

Aus KIF
Warnung: Du bist nicht angemeldet. Deine IP-Adresse wird bei Bearbeitungen öffentlich sichtbar. Melde dich an oder erstelle ein Benutzerkonto, damit Bearbeitungen deinem Benutzernamen zugeordnet werden. Ein eigenes Benutzerkonto hat eine ganze Reihe von Vorteilen.

Die Bearbeitung kann rückgängig gemacht werden. Bitte prüfe den Vergleich unten, um sicherzustellen, dass du dies tun möchtest, und veröffentliche dann unten deine Änderungen, um die Bearbeitung rückgängig zu machen.

Aktuelle Version Dein Text
Zeile 16: Zeile 16:
<p>We played with selfmade laser-cut cards at KIF owned by the FS of JKU Linz. A new version of these cards created for KIF 51.5 in Linz can be found here:
<p>We played with selfmade laser-cut cards at KIF owned by the FS of JKU Linz. A new version of these cards created for KIF 51.5 in Linz can be found here:
* [[media:Two_Rooms_and_a_Boom.zip|Template for Lasercutting as .zip]]
* [[media:Two_Rooms_and_a_Boom.zip|Template for Lasercutting as .zip]]
The folder also contains other useful resources, such as a list of roles.
We used Trotec Ruby with "Default TroLase 1.6mm". The folder also contains other useful resources, such as a list of roles.</p>
 
Cards were fabricated on a Trotec Speedy 400 Laser Cutter using the Default Settings for this Material, TroLase 1.6mm. The material is however not judgmental of the laser cutter, and all CO2 Lasers from 40W should be fine. We did not test direct diode Lasers.<br>
Remember to flip the cards using another flat piece of material after cutting and clean with Isopropanol.<br>
Thank you to Florian Rudinger for creating the laser-cut card design!
</p>
<p>An older print-at-home paper version of the cards can be found [https://drive.google.com/file/d/128nKhISye77uYFXVVHNYQ_EarX_8U_lM here], together with a Setup guide for role combinations. Note that the cards should be printed on hard cardboard (not see-through!), or glued on cardboard. Also note that some cards might be difficult to use for people with specific color-blindness (e.g. yellow-blue if Hot Potato is used), it might therefore be wise to re-adjust them: In the laser-cut cards, this issue was alleviated by using additional symbols on the “color-part” of the card to show team alliance.</p>
<p>An older print-at-home paper version of the cards can be found [https://drive.google.com/file/d/128nKhISye77uYFXVVHNYQ_EarX_8U_lM here], together with a Setup guide for role combinations. Note that the cards should be printed on hard cardboard (not see-through!), or glued on cardboard. Also note that some cards might be difficult to use for people with specific color-blindness (e.g. yellow-blue if Hot Potato is used), it might therefore be wise to re-adjust them: In the laser-cut cards, this issue was alleviated by using additional symbols on the “color-part” of the card to show team alliance.</p>
<p>Have fun playing!</p>
<p>Have fun playing!</p>
Bitte kopiere keine Webseiten, die nicht deine eigenen sind, benutze keine urheberrechtlich geschützten Werke ohne Erlaubnis des Urhebers!
Du gibst uns hiermit deine Zusage, dass du den Text selbst verfasst hast, dass der Text Allgemeingut (public domain) ist oder dass der Urheber seine Zustimmung gegeben hat. Falls dieser Text bereits woanders veröffentlicht wurde, weise bitte auf der Diskussionsseite darauf hin. Bitte beachte, dass alle KIF-Beiträge automatisch unter der „Namensnennung-Weitergabe unter gleichen Bedingungen 2.5 “ stehen (siehe KIF:Urheberrechte für Einzelheiten). Falls du nicht möchtest, dass deine Arbeit hier von anderen verändert und verbreitet wird, dann klicke nicht auf „Seite speichern“.
Abbrechen Bearbeitungshilfe (wird in einem neuen Fenster geöffnet)